Paramtents
Swing Over Slide: 660mm lathe machine
Center Height: 330mm metal bench lathe
Max. Travel of Cross Slide: 420mm horizontal lathe
Dimension(L*W*H): 1500mm/2000mm/3000mm
Swing Over Cross Slide: 570mm high speed: low cost
Max. Travel of Compound Rest: 230mm Ordinary horizontal lathe
Swing in Gap Diameter: 1035mm metal lathe
Width of Bed: 400mm lathe
Main motor power: 7.5kW(10HP) engine lathe
Max. Swing Diameter: 400mm high precision metal bench lathe
Packging & Delivery
Min Order1 piece
Briefing
Detailed
1.High rigid structure design
This machine adopts the traditional horizontal lathe layout, the whole design, rigid, meets the safety standard. The main basic parts of bed and head of the bed are all cast in resin sand, the artificial aging treatment and the stability of the whole machine are superior. The bed body adopts HT300 material, the guide rail of the bed surface of the lathe is quenched by high frequency, the guide rail is G50, and the guide track life is improved.
2.High efficiency and multipurpose design
It can complete the external cylindrical surface of shaft and disc type parts, taper and grooving, chamfering, cutting drilling and tapping, and can process the commonly used metric thread, thread pitch modulus (special thread to consult), the knife frame can be cut short for motor vehicles the composite motion cone, vertical turret into the feed can cut a long cone of motor vehicle.
3.High rigidity spindle
The head stock machine control handle with centralized control, easy operation, the spindle system supported by three point, and the bearing of high precision, strong rigidity, brake axis and the positive and negative changes to the hydraulic control, sensitive and reliable braking, can transform a button to stop the speed, the bed head box with forced lubricating oil pressure, the head stock has beautiful appearance, good rigidity, high precision, stable operation, low noise, easy assembly, small deformation characteristics of spindle thermal.
4.Fast crossbar drive
The slide box of the machine is equipped with a fast moving device, which can quickly move to the desired position.
5.The tail seat with motor drive and high stiffness tail socket
The machine tool is equipped with the motor drive device, especially the larger length specification, which reduces the labor intensity and provides the working efficiency.
6.Chip cooling system
In order to ensure the clean of the site, there are dandruff plates in the lower part of the bed to ensure that the chip is removed from the processing zone. The independent cooling system is equipped with large flow cooling pumps to provide mandatory cooling for turning processing.
Dalian R&C Machinery Co., Ltd.
E-mail:service..........com
WhatsApp:86-155-6681-6110
Address:No.27Shengming 3rd Road, Dalian Economical & Technological Development Zone, Liaoning, China
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.