Advantages Of Coolant Through Lathe Spindle:
Advantages Of Coolant Through Lathe Spindle:
Cutting workpieces will produce high-temperature water vapor, and the water vapor on the surface of the workpiece will isolate the cutting fluid from adhering, resulting in less than 20% effect of cooling the workpiece or tool. Only if the cutting fluid is pressurized above 1000psi (70bar) Contact the workpiece and the tool to achieve the most effective cooling effect. When the tool is not easy to overheat, the linear speed and feed rate can be greatly improved. At this time, it is necessary to use the main shaft water outlet equipment.
The operating principle is that the high-pressure cutting fluid hits the contact point of the tool tip and the workpiece, forcing away the friction and high heat; preventing the swarf from breaking the chip, the cut iron scrap can prevent the workpiece from being entangled with the tool; the high-quality special filtering equipment can be extended The life of the cutting fluid; the cutting tool temperature can increase the cutting linear speed by more than 30%; improve the surface accuracy of the processed parts and reduce the tool marks; CNC imports two necessary equipment for automation, one is tool control software, and the second is high pressure cooling system.
Advantage:
1. Eliminate the twine troubles of iron filings and workpieces in metal processing, avoid iron filings entangled on parts and tools, cutting more smoothly;
2. Increase the feed speed and cutting speed, tap more productivity in production;
3. Reduced tool wear. Especially the risk of broken knife is greatly reduced. Reduce the local temperature generated by high temperature during processing and extend the tool life;
4. Reduce the frequency of tool replacement, reduce the amount of tool consumption, reduce the production cost, and increase the profit margin of products and parts;
5. The quality accuracy and the universal interchangeability and stability of parts are greatly improved, reducing the production of degraded and scrapped parts;
6. Improve the surface finish of the parts, the finish and roughness are more beautiful and beautiful, improve the quality of the parts, and improve the competitiveness of the product market;
Dalian R&C Machinery Co., Ltd.
E-mail:service..........com
WhatsApp:86-155-6681-6110
Address:No.27Shengming 3rd Road, Dalian Economical & Technological Development Zone, Liaoning, China
