How to use the drill center reasonably
How to use the drill center reasonably
The high-speed drilling and attack center occupies a very important position in the processing of small-volume steel parts, aluminum parts, copper parts, acrylics, etc., such as mobile phone casings and mechanical parts processing, especially for the processing of mobile phone parts. Customers purchase high-speed drilling and attack centers because they can significantly improve the processing efficiency of parts, and can meet the requirements of high-speed milling, drilling, tapping and other precision and smoothness. However, there are still many customers who use a high-speed drilling center for a variety of traditional machining, such as heavy cutting, low speed, low feed rate, etc. It is mistaken that a drilling center can shorten the production cycle of all materials. In fact, there are several important factors that need to be considered in order to get the most out of it.
The spindle of the machine tool is divided into heavy cutting and light cutting. The spindle speed of the general high-speed drilling center is 12,000 to 20,000 rpm. In addition to the design difference, the torque of the spindle must be paid attention to. The wrong application will directly affect the machine tool. The life of the spindle, such as a low-torque spindle, should be matched with a tool with a small diameter. If it is machined with a large diameter tool, it will cause a great deal of damage to the spindle. For example, the power of the main shaft is less than 7.5 kW, and it is generally recommended to match a tool with a diameter of 16 mm or less. Because the spindle design is purely for high speed and light cutting, if it is used improperly, it will cause damage to the spindle.
