How to control the CNC lathe?
To operate the CNC lathe, the tool can be used to test the knife. In the manual operation mode, the Z axis is first moved to the end of the workpiece. The Z axis does not move the X axis out of the workpiece end face. The first tool to be used for machining can be set to T 0101. Then find the No. 1 tool offset on the tool offset page. 1. Enter Z0 and press the enter button. The Z axis is correct and then To exit the knife, select the appropriate margin to be machined, and cut the X-axis of the outer circle on the workpiece and do not move it. Exit the end face with the Z-axis. Stop the spindle and use the external micrometer to measure the size of the outer circle of the car. Also enter X on the same tool patch page and add the value you measured and press the input.