What is the turning ?
The turning machining center can process various rotary surfaces, such as inner and outer cylindrical surfaces, inner and outer conical surfaces, threads, grooves, end faces and forming surfaces. The machining accuracy can reach IT8-IT7, and the surface roughness Ra value is 1.6~0.8. To machine a single axis part.
application
Such as straight shafts and general discs, sets of parts and so on. Multi-axis parts (such as crankshafts, eccentrics, etc.) or disc cams can also be machined if the position of the workpiece is changed or the lathe is properly modified. In the single-piece small batch production, various shafts, discs, sleeves and other parts are often processed with a wide-format horizontal lathe or CNC lathe; large parts with large diameter and short length (length to diameter ratio of 0.3~0.8) are used. Vertical lathe processing.
Process characteristics
1. It is easy to ensure the positional accuracy of each working surface of the workpiece
a For example, it is easy to ensure the coaxiality requirement. The workpiece is mounted by the chuck. The rotary axis is the rotary axis of the lathe spindle. The workpiece is mounted on the front and rear ends. The rotary axis is the center connection of the two top points.
b It is easy to ensure that the perpendicularity of the end face and the axis is required by the cross slide guide rail and the perpendicularity of the rotary axis of the workpiece
2, the cutting process is relatively stable to avoid the inertial force and impact force, allowing the use of larger cutting amount, high-speed cutting, which is conducive to productivity.
3. Suitable for finishing of non-ferrous metal parts When the surface roughness of the non-ferrous metal parts is large and the Ra value is small, it is not suitable to use grinding, and it is necessary to use turning or milling. When using a diamond turning tool for a fine car, it can achieve higher quality.
4, the tool is simple Car cutter manufacturing, sharpening and installation are more convenient.
Central parameter
Chuck size: 254mm
Maximum turning diameter: 406mm
Maximum turning length (without clamp): 660mm
Standard bar capacity: 76mm
Folding spindle
Maximum speed: 4800pm
Maximum motor power: 22.4KW
Maximum torque:
Maximum torque (with gearbox option)
Spindle nose: A2-6
Spindle hole: ф88.9mm
Folding diameter
Maximum turning diameter of the bed: 806mm
Maximum turning diameter on the skateboard: 527mm
Maximum turning diameter on the tailstock: 584mm
Folding strokes and feeds
X axis: 318mm
Z axis: 660mm
X-axis maximum thrust: 18238N
Z-axis maximum thrust: 18015N
X-axis rapid traverse speed: 24.0m/min
Z-axis rapid traverse speed: 30.5m/min
Standard configuration
10" hydraulic chuck system
A2-6 spindle nose
3.0" bar capacity
15" color LCD display
Built-in USB interface
1MB of memory
Rigid tapping
Humanized Haas control system
ISO standard G-code programming
made in America
Option part
Programmable hydraulic tailstock
C axis / power knife
300psi high pressure cooling system
1000psi high pressure cooling system
Automatic tool setting system
Crawler chip conveyor
Spindle positioning
Servo automatic door
Ethernet interface
Remote control handwheel (with color LCD)
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.